時間：2018-05-12 08:02來源：藍天飛行翻譯公司 作者：民航翻譯 點擊：次
|
Special Purpose Operational Training (SPOT) A simulator training session under Line Operational Simulation (LOS) designed to address specific training objectives based on technical and CRM requirements. A SPOT scenario may consist of full or partial flight segments depending on the training objectives for the flight. See Line Operational Simulation (LOS). Standard A provision that specifies a system, policy, program, process, procedure, plan, set of measures, facility, component, type of equipment, or any other aspect of operations under the Audit Scope of IOSA/ISSA/ISAGO that is considered an operational necessity, and with which conformity is required by an operator/provider. Standard Callout A required uniform verbal statement made by crew members during operations that identifies conditions, actions, instrument settings, switch positions, visual sightings or other operational items specified by procedure. Standard Part Is a part manufactured in complete compliance with an established Government or industry-accepted specification, which includes design, manufacturing, and uniform identification requirements. The specification must include all information necessary to produce and confirm the part. The specification must be published so that any party may manufacture the part. Examples include, but are not limited to: • National Aerospace Standards (NAS); • Air Force-Navy Aeronautical Standard (AN); • Society of Automotive Engineers (SAE); • Aerospace Standard (AS); • Military Standard (MS). State The government that has sovereignty over the territory and population that makes up a nation or country. Note: The term State as used in the ISM and GOSM is a specific term that means the State of the Operator or the State in which the Provider operates. See State of the Operator. Note: The term state as used in the ISM and GOSM is a generic term that means any relevant state. State Acceptance The method whereby a state addresses a matter submitted for its review with a response that is not formal or necessarily active. A state may accept a matter submitted to it for review as being in compliance with the applicable standards if the state does not specifically reject all or a portion of the matter under review, usually after some defined period of time after submission. Where there is no method for acceptance, or where acceptance is not required by a state for a specific matter, then state acceptance of the matter is considered implicit. State Approval The method whereby a state addresses a matter submitted for its review with an active and formal response, which constitutes a finding or determination of compliance with the applicable standards. An approval will be evidenced by the signature of the approving official, the issuance of a document or certificate, or some other formal action taken by the relevant state. State Approval Authority The authority within a state or country that is responsible for issuing a state approval document or certificate. See State Approval. Equivalent Terms: Authority, National Aviation Authority State of Flight Arrival The territory of a state in which a commercial flight arrives. State of Flight Departure The territory of a state from which a commercial flight departs. State of Design The state having jurisdiction over the organization responsible for an aircraft type design. State of Destination The state in the territory of which a cargo shipment is finally to be unloaded from an aircraft. State of Manufacture The State having jurisdiction over the organization responsible for the final assembly of the aircraft. State of Origin The state in the territory of which a cargo shipment was first loaded onto an aircraft. State of Registry The State on whose register the aircraft is entered. Equivalent Term: Country of Registry State of the Operator The state in which the operator's principal place of business is located or, if there is no such place of business, the operator's permanent residence. Note: In the ISM and GOSM, use of the term State has the same meaning as State of the Operator. State Safety Program (SSP) An integrated set of regulations and activities established by a State aimed at managing civil aviation safety. Station An airport where a Provider conducts ground operations for one or more Customer Airlines. Station Audit The Audit, under ISAGO, which assesses conformity with the applicable GOSARPs for the GSP`s implementation of corporate and locally managed processes and procedures for the ground operations performed that are within the scope of ISAGO.. Sterile Area |
